My second project

Discussion of microbrand watches
Post Reply
alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

My second project

Post by alex693 » Fri Aug 09, 2019 11:56 am

hi everyone, i send pict of my second project, only a mockup now.. 3D printed, EVERITHING Will be worked on CNC machine and hand made.ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage

Inviato dal mio WAS-LX1A utilizzando Tapatalk


User avatar
hoppyjr
HJ
Posts: 35795
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: My second project

Post by hoppyjr » Fri Aug 09, 2019 12:09 pm

I’m surprised you’re back, but this one is ugly too.


alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Fri Aug 09, 2019 12:22 pm

When i will see your project ..............

Inviato dal mio WAS-LX1A utilizzando Tapatalk


alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Fri Aug 09, 2019 12:42 pm

For sure you are not able to do It

Inviato dal mio WAS-LX1A utilizzando Tapatalk


User avatar
Seppia
Posts: 5749
Joined: Wed May 20, 2015 5:06 pm
Name: Andrea
Location: Hong Kong

Re: My second project

Post by Seppia » Fri Aug 09, 2019 1:11 pm

I think it needs a bigger crown :)

User avatar
Panerai7
Posts: 16008
Joined: Mon Mar 11, 2013 8:09 pm
Name: Art
Location: North Carolina

Re: My second project

Post by Panerai7 » Fri Aug 09, 2019 1:17 pm

Mama Mia! FACCIA BRUTTA!

AtomicTom
Nuclear Personality!!!!
Posts: 11564
Joined: Fri Jun 29, 2012 9:59 am
Name: Tom

Re: My second project

Post by AtomicTom » Fri Aug 09, 2019 1:23 pm

Has to be so much fun to be able to actually come up with a watch idea,
or concept, and be able to make it become a reality like this Alex. :o :)
The design of these is so sleek it almost seems as if they are part race car,
and maybe even part UFO. ..Very very cool !! 8-)

Really appreciate the look. Thanks a lot !!!

User avatar
hoppyjr
HJ
Posts: 35795
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: My second project

Post by hoppyjr » Fri Aug 09, 2019 1:28 pm

alex693 wrote:For sure you are not able to do It ImageImageImageImageImageImage

Inviato dal mio WAS-LX1A utilizzando Tapatalk
I would rather purchase a good looking watch than make an ugly one.

:grin:

alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Fri Aug 09, 2019 1:28 pm

AtomicTom wrote:Has to be so much fun to be able to actually come up with a watch idea,
or concept, and be able to make it become a reality like this Alex. :o :)
The design of these is so sleek it almost seems as if they are part race car,
and maybe even part UFO. ..Very very cool !! 8-)

Really appreciate the look. Thanks a lot !!!
Thanks to you

Inviato dal mio WAS-LX1A utilizzando Tapatalk


alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Fri Aug 09, 2019 1:42 pm

hoppyjr wrote:
alex693 wrote:For sure you are not able to do It ImageImageImageImageImageImage

Inviato dal mio WAS-LX1A utilizzando Tapatalk
I would rather purchase a good looking watch than make an ugly one.

:grin:
You are only invidious my friend Image ,Is more simple criticize,. That tò do It ImageImage.
Have a nice day bro!

Inviato dal mio WAS-LX1A utilizzando Tapatalk



User avatar
Safetystop
Diving (muff) is not a team sport.
Posts: 1489
Joined: Tue Dec 01, 2009 1:41 pm
Name: Dr. Eaton Beaver
Location: Here

Re: My second project

Post by Safetystop » Fri Aug 09, 2019 4:06 pm

alex693 wrote:
Fri Aug 09, 2019 1:42 pm
hoppyjr wrote:
alex693 wrote:For sure you are not able to do It ImageImageImageImageImageImage

Inviato dal mio WAS-LX1A utilizzando Tapatalk
I would rather purchase a good looking watch than make an ugly one.

:grin:
You are only invidious my friend Image ,Is more simple criticize,. That tò do It ImageImage.
Have a nice day bro!

Inviato dal mio WAS-LX1A utilizzando Tapatalk
Easy Cochise. What you're doing is not that difficult. 3D printing tech has made is so that any monkey with a computer can print anything...including firearms. Because of my job I have access to 5-axis machines, metal 3D printers, etc. But just because I CAN do it, doesn't mean I SHOULD do it. You built a project and some don't like it, myself included. It's a matter of taste. If you like it, then great be proud. But take it easy with thinking you're somehow special because you can do what millions of people can do. Just because some can't, doesn't make you special.

This isn't WUS. Everybody here will give you their opinion, unpolished. So be prepared for that. Grow a thicker skin or post on WUS and get the accolades your ego wanted in the first place for "over the internet" validation.

User avatar
hoppyjr
HJ
Posts: 35795
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: My second project

Post by hoppyjr » Fri Aug 09, 2019 4:16 pm

He also edited his Tapatalk profile to hide his “rep” activity, after being outed in his first thread here.


ImageImage

User avatar
Henryj
Bubblehead
Posts: 4215
Joined: Tue Dec 01, 2009 4:17 pm
Name: Old guy
Location: Wapakoneta, Ohio

Re: My second project

Post by Henryj » Fri Aug 09, 2019 6:40 pm

It looks to me like I could make one of them out of fittings from the plumbing aisle at Home Depot and a couple cans of Krylon. Source a movement from the dashboard clock of a Nepalese fire truck, and it’s a license to print money.
Live slow, die old, leave a thoroughly used up corpse.

alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Thu Nov 07, 2019 3:48 am

Hi everyone, i would share my New project, PATO, everithing Worked by CNC machine, eta 2824/2, shapphire glass, sandwich Dial lasered, custom come e custom writer, back steel 316L work custom Word, hand made strap.

Inviato dal mio WAS-LX1A utilizzando Tapatalk


User avatar
CarloDWC
Posts: 1522
Joined: Mon Jul 03, 2017 8:08 am
Name: Carlo

Re: My second project

Post by CarloDWC » Thu Nov 07, 2019 12:55 pm

alex693 wrote:
Thu Nov 07, 2019 3:48 am
Hi everyone, i would share my New project, PATO, everithing Worked by CNC machine, eta 2824/2, shapphire glass, sandwich Dial lasered, custom come e custom writer, back steel 316L work custom Word, hand made strap.

Inviato dal mio WAS-LX1A utilizzando Tapatalk
Hi Alex, sounds good. Post some pics.

And don't worry about people not liking your projects, each person is different... :grin:

At least you are creating... :thumbsup:

alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Thu Nov 07, 2019 1:01 pm

CarloDWC wrote:
alex693 wrote:
Thu Nov 07, 2019 3:48 am
Hi everyone, i would share my New project, PATO, everithing Worked by CNC machine, eta 2824/2, shapphire glass, sandwich Dial lasered, custom come e custom writer, back steel 316L work custom Word, hand made strap.

Inviato dal mio WAS-LX1A utilizzando Tapatalk
Hi Alex, sounds good. Post some pics.

And don't worry about people not liking your projects, each person is different... :grin:

At least you are creating... Image
Many thanks Image
IMG_20191104_231554.jpg
IMG_20191104_231517.jpg
IMG_20191104_231443.jpg
IMG_20191104_230106.jpg
IMG_20191104_230012.jpg
Inviato dal mio WAS-LX1A utilizzando Tapatalk

You do not have the required permissions to view the files attached to this post.

kakefe
Posts: 8
Joined: Thu May 08, 2014 11:45 am
Location: Moscow
Contact:

Re: My second project

Post by kakefe » Thu Nov 07, 2019 10:24 pm

Wow !! congrats!! both projects are stunning..

I appreciate when people put their efforts towards creativity.. no matter what the results are...

Sent from my ONEPLUS A6003 using Tapatalk

Using Tapatalk

User avatar
CarloDWC
Posts: 1522
Joined: Mon Jul 03, 2017 8:08 am
Name: Carlo

Re: My second project

Post by CarloDWC » Fri Nov 08, 2019 8:31 am

kakefe wrote:
Thu Nov 07, 2019 10:24 pm
Wow !! congrats!! both projects are stunning..

I appreciate when people put their efforts towards creativity.. no matter what the results are...

Sent from my ONEPLUS A6003 using Tapatalk
I agree, thank you for posting. Although there is a number of things I would do to it to "customize" it for myself, I indeed appreciate what you do and the results. Please post more when you have the chance. :thumbsup:

alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Fri Nov 22, 2019 11:17 am

Coming soon mokume Dial
received_2393520914221258.jpg
Inviato dal mio WAS-LX1A utilizzando Tapatalk

You do not have the required permissions to view the files attached to this post.

alex693
Posts: 28
Joined: Mon Apr 08, 2019 2:39 pm

Re: My second project

Post by alex693 » Mon Dec 07, 2020 2:01 pm

Other versions, titanium
What do you think?
Thanks everyone
ImageImageImageImageImageImage

Inviato dal mio WAS-LX1A utilizzando Tapatalk


User avatar
hoppyjr
HJ
Posts: 35795
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: My second project

Post by hoppyjr » Mon Dec 07, 2020 3:14 pm

I do admire your ability to see past all the criticism.

It looks much too thick for me and the dial is definitely not my style, but I’m sure there’s a sense of accomplishment in making some thing from scratch.

User avatar
deepcdvr
Flipper Extraordinaire
Posts: 12181
Joined: Tue Dec 01, 2009 2:29 pm
Name: Paul

Re: My second project

Post by deepcdvr » Mon Dec 07, 2020 7:44 pm

Looks good Alex - kick some ass with that thing :thumbsup:
VR/
Paul

NEVER SETTLE!

User avatar
BBK357
Ban Jacobs
Posts: 26822
Joined: Mon Aug 15, 2011 2:01 pm
Name: Vladimir Makarov
Location: Ohio

My second project

Post by BBK357 » Mon Dec 07, 2020 9:17 pm

I like the titanium and orange hands.
I also like white claw.
Take for what it’s worth.

Sent from my iPhone using Tapatalk
DEATH FROM ABOVE
:ak:

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests