Discussion of Sinn watches.
-
BBK357
- Ban Jacobs
- Posts: 28857
- Joined: Mon Aug 15, 2011 2:01 pm
- Name: Vladimir
- Location: Ohio
Post
by BBK357 » Thu Nov 13, 2014 9:27 pm
unixshrk wrote:BBK357 wrote:unixshrk wrote:Thanks Ben for the bars.
I was told the bracelet wouldn't fit. YMMV
They are very similar, but not identical.
sent today- should be there in a few days.
Thanks Ben
Did you send the EZM1 too?
No thats going to WU for the SD.......
DEATH FROM ABOVE
-
foodle
- Posts: 4166
- Joined: Wed May 30, 2012 7:35 pm
Post
by foodle » Thu Nov 13, 2014 9:53 pm
BBK357 wrote:unixshrk wrote:BBK357 wrote:unixshrk wrote:Thanks Ben for the bars.
I was told the bracelet wouldn't fit. YMMV
They are very similar, but not identical.
sent today- should be there in a few days.
Thanks Ben
Did you send the EZM1 too?
No thats going to WU for the SD.......
For serious?
-
matt.wu
- Wu
- Posts: 29830
- Joined: Tue Dec 01, 2009 1:33 pm
- Name: m@
- Location: SF Bay Area, CA, USA
Post
by matt.wu » Thu Nov 13, 2014 10:25 pm
No. Wu sold Ben his first EZM-1.
-
BBK357
- Ban Jacobs
- Posts: 28857
- Joined: Mon Aug 15, 2011 2:01 pm
- Name: Vladimir
- Location: Ohio
Post
by BBK357 » Thu Nov 13, 2014 10:35 pm
foodle wrote:BBK357 wrote:unixshrk wrote:BBK357 wrote:unixshrk wrote:Thanks Ben for the bars.
I was told the bracelet wouldn't fit. YMMV
They are very similar, but not identical.
sent today- should be there in a few days.
Thanks Ben
Did you send the EZM1 too?
No thats going to WU for the SD.......
For serious?
Dreaming
DEATH FROM ABOVE
-
BBK357
- Ban Jacobs
- Posts: 28857
- Joined: Mon Aug 15, 2011 2:01 pm
- Name: Vladimir
- Location: Ohio
Post
by BBK357 » Thu Nov 13, 2014 10:35 pm
matt.wu wrote:No. Wu sold Ben his first EZM-1.
It's been a slippery soap since .
DEATH FROM ABOVE
-
hoppyjr
- HJ
- Posts: 39746
- Joined: Thu Feb 24, 2011 9:05 am
- Name: Hoppy
Post
by hoppyjr » Thu Nov 13, 2014 11:31 pm
BBK357 wrote:matt.wu wrote:No. Wu sold Ben his first EZM-1.
It's been a slippery soap since .
LOL!!! Just don't drop it bro
-
CGSshorty
- Admin
- Posts: 33925
- Joined: Tue Dec 01, 2009 5:18 pm
- Location: Boynton Beach, FL
Post
by CGSshorty » Fri Nov 14, 2014 6:49 am
Have you tried this on an Isofrane?
"It's such a fine line between stupid, and clever."
David St. Hubbins
-
unixshrk
- This. Truth.
- Posts: 10568
- Joined: Wed Oct 12, 2011 8:29 am
- Name: Chris
- Location: North Texas / Colorado
Post
by unixshrk » Fri Nov 14, 2014 6:53 am
CGSshorty wrote:Have you tried this on an Isofrane?
Not yet, I have just now put it on ZULU which is really comfortable
-
DiamonDiver
- Posts: 2
- Joined: Sat Dec 20, 2014 8:41 pm
- Name: Chip
Post
by DiamonDiver » Sun Dec 21, 2014 5:44 am
Enjoy the EZM 13, that's one nice watch.
I looked long and hard at this watch before I pulled the trigger on an EZM 10 TESTAF. I have a U1000 and the EZM 13 was just a little too close. The EZM 10 isn't perfect, with no drilled lugs, too many subdials, and I think the pushers should match the case material. But its shortcomings were not enough to dissuade me from owning the most technical Sinn ever made.
The EZM 10 on bracelet has become my daily wearer and If I ever decide to trade my U1000 I am sure an EZM 13 will replace it.
If you decide to actually use your dive watch for diving be sure to put a nato strap on it, I lost a Suunto D9 in 300 feet of water when the rubber strap failed while drifting up the Florida coast on a deco stop.
-
unixshrk
- This. Truth.
- Posts: 10568
- Joined: Wed Oct 12, 2011 8:29 am
- Name: Chris
- Location: North Texas / Colorado
Post
by unixshrk » Sun Dec 21, 2014 5:57 am
DiamonDiver wrote:Enjoy the EZM 13, that's one nice watch.
I looked long and hard at this watch before I pulled the trigger on an EZM 10 TESTAF. I have a U1000 and the EZM 13 was just a little too close. The EZM 10 isn't perfect, with no drilled lugs, too many subdials, and I think the pushers should match the case material. But its shortcomings were not enough to dissuade me from owning the most technical Sinn ever made.
The EZM 10 on bracelet has become my daily wearer and If I ever decide to trade my U1000 I am sure an EZM 13 will replace it.
If you decide to actually use your dive watch for diving be sure to put a nato strap on it, I lost a Suunto D9 in 300 feet of water when the rubber strap failed while drifting up the Florida coast on a deco stop.
Thanks. I do wear it quite a bit.
Sorry to hear about your loss, but at least it was a more affordable watch than it could have been.
Welcome to DWC
-
BBK357
- Ban Jacobs
- Posts: 28857
- Joined: Mon Aug 15, 2011 2:01 pm
- Name: Vladimir
- Location: Ohio
Post
by BBK357 » Sun Dec 21, 2014 10:57 am
DiamonDiver wrote:Enjoy the EZM 13, that's one nice watch.
I looked long and hard at this watch before I pulled the trigger on an EZM 10 TESTAF. I have a U1000 and the EZM 13 was just a little too close. The EZM 10 isn't perfect, with no drilled lugs, too many subdials, and I think the pushers should match the case material. But its shortcomings were not enough to dissuade me from owning the most technical Sinn ever made.
The EZM 10 on bracelet has become my daily wearer and If I ever decide to trade my U1000 I am sure an EZM 13 will replace it.
If you decide to actually use your dive watch for diving be sure to put a nato strap on it, I lost a Suunto D9 in 300 feet of water when the rubber strap failed while drifting up the Florida coast on a deco stop.
Loved my 10, I miss it. If they become more available I may grab another.
DEATH FROM ABOVE
-
DiamonDiver
- Posts: 2
- Joined: Sat Dec 20, 2014 8:41 pm
- Name: Chip
Post
by DiamonDiver » Tue Dec 23, 2014 4:19 am
The perfect Sinn would be an update of the EZM1 with center jump minute in titanium. SZ01 caliber with no sub dials or blacked out seconds sub dial like the U1000. It could have red date or no date and the Biditectional bezel should lock like the U bezels, push to rotate. The bezel should be interchangeable, minute, minute countdown, and hour.
It should be 20 bar / 200 meter water resistant with pushers that work underwater. And of course it should be Diapal with copper sulphate capsule.
Until Sinn builds this watch the EZM13 will have to suffice.
Last edited by
DiamonDiver on Tue Dec 23, 2014 10:29 am, edited 1 time in total.
-
BBK357
- Ban Jacobs
- Posts: 28857
- Joined: Mon Aug 15, 2011 2:01 pm
- Name: Vladimir
- Location: Ohio
Post
by BBK357 » Tue Dec 23, 2014 5:48 am
DiamonDiver wrote:The perfect Sinn would be an update of the EZM1 with center jump minute in titanium. SZ01 caliber with no sub dials or blacked out minute sub dial like the U1000. It could have red date or no date and the Biditectional bezel should lock like the U bezels, push to rotate. The bezel should be interchangeable, minute, minute countdown, and hour.
It should be 20 bar / 200 meter water resistant with pushers that work underwater. And of course it should be Diapal with copper sulphate capsule.
Until Sinn builds this watch the EZM13 will have to suffice.
Agree w/ all of the above, red date and might we well be 30bar with all the tech involved.
DEATH FROM ABOVE
-
BBK357
- Ban Jacobs
- Posts: 28857
- Joined: Mon Aug 15, 2011 2:01 pm
- Name: Vladimir
- Location: Ohio
Post
by BBK357 » Sat Apr 25, 2020 10:50 pm
DiamonDiver wrote:The perfect Sinn would be an update of the EZM1 with center jump minute in titanium. SZ01 caliber with no sub dials or blacked out seconds sub dial like the U1000. It could have red date or no date and the Biditectional bezel should lock like the U bezels, push to rotate. The bezel should be interchangeable, minute, minute countdown, and hour.
It should be 20 bar / 200 meter water resistant with pushers that work underwater. And of course it should be Diapal with copper sulphate capsule.
Until Sinn builds this watch the EZM13 will have to suffice.
MTF.
Michel de Nostredame
Fuckin Chip made only 2 post, and he basically just saw the future and told us about it.
DEATH FROM ABOVE
Who is online
Users browsing this forum: No registered users and 36 guests