AEgir Tubes?
Moderator: t20569cald
- manitoujoe
- Posts: 3443
- Joined: Tue Dec 01, 2009 2:37 pm
- Name: Mark
- Location: Louisville, KY
AEgir Tubes?
Has anyone bought tubes for straps that live on their CD-2s? I’ve got a olive canvas that I cannot line the screw bar correctly on. I figured if there was nowhere to go, I’d have an easier time.
I ordered some from Panatime but they were too narrow. The bars are 2mm. Hoping someone has a good source. Thanks in advance!
Sent from my iPad using Tapatalk
I ordered some from Panatime but they were too narrow. The bars are 2mm. Hoping someone has a good source. Thanks in advance!
Sent from my iPad using Tapatalk
Some people just have a way with words, and other people … oh … not have way.
Steve Martin
Steve Martin
Re: AEgir Tubes?
I didn’t on the Aegir, but I had a similar problem with a different watch (and I don’t remember which one lol!). The solution was H2O tubes.
- manitoujoe
- Posts: 3443
- Joined: Tue Dec 01, 2009 2:37 pm
- Name: Mark
- Location: Louisville, KY
Re: AEgir Tubes?
You are awesome. Thank you! Hopefully they sell them separately. ![](http://emoji.tapatalk-cdn.com/emoji3.png)
Sent from my iPad using Tapatalk
![](http://emoji.tapatalk-cdn.com/emoji3.png)
Sent from my iPad using Tapatalk
Some people just have a way with words, and other people … oh … not have way.
Steve Martin
Steve Martin
- toxicavenger
- President Tranny
- Posts: 48114
- Joined: Fri Mar 12, 2010 8:25 am
- Name: HeadDIK
- Location: Colorado Springs
- tattoo chef
- <Will Skull for Food>
- Posts: 5673
- Joined: Thu Mar 11, 2010 8:03 pm
- Name: Don
Re: AEgir Tubes?
I am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
- toxicavenger
- President Tranny
- Posts: 48114
- Joined: Fri Mar 12, 2010 8:25 am
- Name: HeadDIK
- Location: Colorado Springs
Re: AEgir Tubes?
The tube holes in the case to the screw bars. That way you can screw the ends in easier. I think Kobold use to make a tool for this if I recall.tattoo chef wrote: ↑Thu May 03, 2018 7:11 pmI am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
Website: http://smallwhitestubbies.com/ ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- tattoo chef
- <Will Skull for Food>
- Posts: 5673
- Joined: Thu Mar 11, 2010 8:03 pm
- Name: Don
Re: AEgir Tubes?
I’ve never run into this issue, ever.toxicavenger wrote:The tube holes in the case to the screw bars. That way you can screw the ends in easier. I think Kobold use to make a tool for this if I recall.tattoo chef wrote: ↑Thu May 03, 2018 7:11 pmI am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- toxicavenger
- President Tranny
- Posts: 48114
- Joined: Fri Mar 12, 2010 8:25 am
- Name: HeadDIK
- Location: Colorado Springs
Re: AEgir Tubes?
Sometimes on a thicker strap you can't push the screw bar all the way through it and have it line up to the hole on the case. I personally have moved the strap around to line it up or just use the end of a paper clip.tattoo chef wrote: ↑Thu May 03, 2018 7:21 pmI’ve never run into this issue, ever.toxicavenger wrote:The tube holes in the case to the screw bars. That way you can screw the ends in easier. I think Kobold use to make a tool for this if I recall.tattoo chef wrote: ↑Thu May 03, 2018 7:11 pmI am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Website: http://smallwhitestubbies.com/ ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- Jeep99dad
- Grand-père
- Posts: 32355
- Joined: Tue Apr 27, 2010 6:07 am
- Name: Brice
- Location: FlipVille, SC
Re: AEgir Tubes?
Me neithertattoo chef wrote:I’ve never run into this issue, ever.toxicavenger wrote:The tube holes in the case to the screw bars. That way you can screw the ends in easier. I think Kobold use to make a tool for this if I recall.tattoo chef wrote: ↑Thu May 03, 2018 7:11 pmI am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
![Image](http://emoji.tapatalk-cdn.com/emoji848.png)
Merde Alors! Et Vive Les Francais! ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
- toxicavenger
- President Tranny
- Posts: 48114
- Joined: Fri Mar 12, 2010 8:25 am
- Name: HeadDIK
- Location: Colorado Springs
Re: AEgir Tubes?
So the screw bars just automatically went into the lug holes on the other side?Jeep99dad wrote: ↑Thu May 03, 2018 8:07 pmMe neithertattoo chef wrote:I’ve never run into this issue, ever.toxicavenger wrote:The tube holes in the case to the screw bars. That way you can screw the ends in easier. I think Kobold use to make a tool for this if I recall.tattoo chef wrote: ↑Thu May 03, 2018 7:11 pmI am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk![]()
Website: http://smallwhitestubbies.com/ ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- Jeep99dad
- Grand-père
- Posts: 32355
- Joined: Tue Apr 27, 2010 6:07 am
- Name: Brice
- Location: FlipVille, SC
Re: AEgir Tubes?
Pretty much or with just a little guidance. I mean nothing crazy.toxicavenger wrote:So the screw bars just automatically went into the lug holes on the other side?Jeep99dad wrote: ↑Thu May 03, 2018 8:07 pmMe neithertattoo chef wrote:I’ve never run into this issue, ever.toxicavenger wrote:The tube holes in the case to the screw bars. That way you can screw the ends in easier. I think Kobold use to make a tool for this if I recall.tattoo chef wrote: ↑Thu May 03, 2018 7:11 pmI am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk![]()
Merde Alors! Et Vive Les Francais! ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
- toxicavenger
- President Tranny
- Posts: 48114
- Joined: Fri Mar 12, 2010 8:25 am
- Name: HeadDIK
- Location: Colorado Springs
Re: AEgir Tubes?
Yep same here. I used a paper clip for the guidance. Or I pushed the strap around to guide it.Jeep99dad wrote: ↑Thu May 03, 2018 9:17 pmPretty much or with just a little guidance. I mean nothing crazy.toxicavenger wrote:So the screw bars just automatically went into the lug holes on the other side?Jeep99dad wrote: ↑Thu May 03, 2018 8:07 pmMe neithertattoo chef wrote:I’ve never run into this issue, ever.toxicavenger wrote:The tube holes in the case to the screw bars. That way you can screw the ends in easier. I think Kobold use to make a tool for this if I recall.tattoo chef wrote: ↑Thu May 03, 2018 7:11 pmI am being dense for sure, but what are we talking about lining up?toxicavenger wrote:I used a paper clip to line it up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk![]()
Website: http://smallwhitestubbies.com/ ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: AEgir Tubes?
FWIW, I think having tubes in softer material straps is just a good idea from a general practice perspective. I've noticed Seiko has started adding tubes to their new generation rubber straps (the ones that feel softer, almost silicone-like, such as the model included with the SLA017 and SBDC053).
Obviously, only use tubes on watches with drilled lugs.
Obviously, only use tubes on watches with drilled lugs.
- manitoujoe
- Posts: 3443
- Joined: Tue Dec 01, 2009 2:37 pm
- Name: Mark
- Location: Louisville, KY
Re: AEgir Tubes?
It’s only been an issue on this one canvas strap. I spent an hour patiently trying to guide the screwbar into the hole. I have no idea if it’s a thickness thing or what.
Just trying to find an easy solution. I’ll try the paper clip idea.
Just trying to find an easy solution. I’ll try the paper clip idea.
Some people just have a way with words, and other people … oh … not have way.
Steve Martin
Steve Martin
- Axelay2003
- Posts: 5916
- Joined: Sat Dec 04, 2010 9:03 am
- Name: Gerard
- Location: City of Oranges, FL
Re: AEgir Tubes?
Too thick.manitoujoe wrote: ↑Fri May 04, 2018 4:47 amIt’s only been an issue on this one canvas strap. I spent an hour patiently trying to guide the screwbar into the hole. I have no idea if it’s a thickness thing or what.
Just trying to find an easy solution. I’ll try the paper clip idea.
It's a beautiful world! Gerald.
![Image](http://i58.servimg.com/u/f58/15/90/22/27/flash_21.jpg)
![Image](http://i58.servimg.com/u/f58/15/90/22/27/flash_21.jpg)
Re: AEgir Tubes?
2 screwdrivers....its always the answer....call Wjean
- manitoujoe
- Posts: 3443
- Joined: Tue Dec 01, 2009 2:37 pm
- Name: Mark
- Location: Louisville, KY
Re: AEgir Tubes?
It’s a single-end threaded screwbar so only 1 screwdriver needed. No luck guiding the bar. ![Sad :(](./images/smilies/icon_e_sad.gif)
I’m at a loss. There has to be a way.
![Sad :(](./images/smilies/icon_e_sad.gif)
I’m at a loss. There has to be a way.
Some people just have a way with words, and other people … oh … not have way.
Steve Martin
Steve Martin
- tattoo chef
- <Will Skull for Food>
- Posts: 5673
- Joined: Thu Mar 11, 2010 8:03 pm
- Name: Don
Re: AEgir Tubes?
I honestly have never encountered this issue. Is the strap hitting the inside of the lugs so much that it’s just too thick and not enough clearance? I mean, the Ægir comes on an isofrane, so how thick is this strap?manitoujoe wrote:It’s a single-end threaded screwbar so only 1 screwdriver needed. No luck guiding the bar.
I’m at a loss. There has to be a way.
Sent from my iPhone using Tapatalk
Re: AEgir Tubes?
If the strap is that thick a tube won’t help.
- manitoujoe
- Posts: 3443
- Joined: Tue Dec 01, 2009 2:37 pm
- Name: Mark
- Location: Louisville, KY
Re: AEgir Tubes?
I can’t imagine it’s too thick. It’s a normal canvas strap. Not sure who made it. I think something on the inside of the strap is nudging it just out of sync with the hole.
When I try other straps, it kind of sinks into the threaded hole and all is good. With this one, it just never does.
I’m getting so frustrated I’m probably going to sell the strap. Not the AEgir’s fault. Lol
Sent from my iPad using Tapatalk
When I try other straps, it kind of sinks into the threaded hole and all is good. With this one, it just never does.
I’m getting so frustrated I’m probably going to sell the strap. Not the AEgir’s fault. Lol
Sent from my iPad using Tapatalk
Some people just have a way with words, and other people … oh … not have way.
Steve Martin
Steve Martin
Re: AEgir Tubes?
The CD-2 is a pain in the ass for straps. I never take mine off the Isofrane.
"It's such a fine line between stupid, and clever."
David St. Hubbins
David St. Hubbins
Who is online
Users browsing this forum: No registered users and 124 guests