CD-1 rapid prototype

Discussion of Ægir watches.

Moderator: t20569cald

Post Reply
User avatar
t20569cald
Founder and Owner of Ægir Instruments
Posts: 2157
Joined: Wed Dec 02, 2009 7:20 am
Location: Australia

CD-1 rapid prototype

Post by t20569cald » Mon Apr 15, 2013 8:38 am

Well I know it glows in the dark and you cant really see anything, but hey, my daughter ordered that material to make toys and I had to try it out. Pretty cool actually. And I know how some of you like lume, so does not get much better than this.
Promise to upload a video and day time pics of this plastic prototype over the coming few days.
I will also add a side by side dial, and watch of the current model.
Image
Image
Image
Image
Rome wasn't built in a day, but i wasn't on that job!


http://www.aegirinstruments.com

User avatar
CGSshorty
Admin
Posts: 33918
Joined: Tue Dec 01, 2009 5:18 pm
Location: Boynton Beach, FL

Re: CD-1 rapid prototype

Post by CGSshorty » Mon Apr 15, 2013 8:56 am

That is cool.
"It's such a fine line between stupid, and clever."
David St. Hubbins

User avatar
hoppyjr
HJ
Posts: 39668
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: CD-1 rapid prototype

Post by hoppyjr » Mon Apr 15, 2013 11:30 am

Oh yea!


Sent using Tapatalk

User avatar
Pasquale
Becky
Posts: 18390
Joined: Tue Dec 01, 2009 1:23 pm
Name: Pasquale
Location: Queens NYC

Re: CD-1 rapid prototype

Post by Pasquale » Mon Apr 15, 2013 2:18 pm

Can it make my hammer glow ?? :excited:
Pasquale

Image
NSC

User avatar
Jeep99dad
Grand-père
Posts: 32293
Joined: Tue Apr 27, 2010 6:07 am
Name: Brice
Location: FlipVille, SC

Re: CD-1 rapid prototype

Post by Jeep99dad » Mon Apr 15, 2013 2:57 pm

Awesome!!
Merde Alors! Et Vive Les Francais! :)

User avatar
t20569cald
Founder and Owner of Ægir Instruments
Posts: 2157
Joined: Wed Dec 02, 2009 7:20 am
Location: Australia

Re: CD-1 rapid prototype

Post by t20569cald » Mon Apr 15, 2013 5:31 pm

patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
Image
Rome wasn't built in a day, but i wasn't on that job!


http://www.aegirinstruments.com

User avatar
toxicavenger
President Tranny
Posts: 48085
Joined: Fri Mar 12, 2010 8:25 am
Name: HeadDIK
Location: Colorado Springs

Re: CD-1 rapid prototype

Post by toxicavenger » Mon Apr 15, 2013 5:38 pm

t20569cald wrote:
patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
todd he only needs a small drop of it.

User avatar
Pasquale
Becky
Posts: 18390
Joined: Tue Dec 01, 2009 1:23 pm
Name: Pasquale
Location: Queens NYC

Re: CD-1 rapid prototype

Post by Pasquale » Mon Apr 15, 2013 5:52 pm

t20569cald wrote:
patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
The mommy and daddy button
Pasquale

Image
NSC

User avatar
BSears
The Grumpy Global Mod
Posts: 19191
Joined: Tue Dec 01, 2009 12:22 pm
Name: Mr. Dibs
Location: Big Blue Nation, Land of the Free-Home of the Brave

Re: CD-1 rapid prototype

Post by BSears » Mon Apr 15, 2013 7:00 pm

patstarrx wrote:
t20569cald wrote:
patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
The mommy and daddy button
My guess is yes, as long as you don't mind dippin yer junk in molten hot plastic. :mrgreen:
You give respect, you'll get respect - you just don't know your place.

User avatar
jeckyll
Honorary Assistant Jr. Hall Monitor in Training
Posts: 11910
Joined: Thu Feb 25, 2010 10:11 pm
Name: Björn

Re: CD-1 rapid prototype

Post by jeckyll » Mon Apr 15, 2013 7:08 pm

Image

:gayumbrella:
We all have the same enemy. The enemy is the tyranny of the dull mind. - - Tom Robbins

User avatar
matt.wu
Wu
Posts: 29817
Joined: Tue Dec 01, 2009 1:33 pm
Name: m@
Location: SF Bay Area, CA, USA

Re: CD-1 rapid prototype

Post by matt.wu » Mon Apr 15, 2013 7:14 pm

toxicavenger wrote:
t20569cald wrote:
patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
todd he only needs a small drop of it.

:lol:
:htfu:

User avatar
hoppyjr
HJ
Posts: 39668
Joined: Thu Feb 24, 2011 9:05 am
Name: Hoppy

Re: CD-1 rapid prototype

Post by hoppyjr » Tue Apr 16, 2013 12:51 am

BSears wrote:
patstarrx wrote:
t20569cald wrote:
patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
The mommy and daddy button
My guess is yes, as long as you don't mind dippin yer junk in molten hot plastic. :mrgreen:
If that's like candle wax he should be ok, right Terry??? :gayumbrella:




Sent using Tapatalk

User avatar
t20569cald
Founder and Owner of Ægir Instruments
Posts: 2157
Joined: Wed Dec 02, 2009 7:20 am
Location: Australia

Re: CD-1 rapid prototype

Post by t20569cald » Tue Apr 16, 2013 1:43 am

hoppyjr wrote:
BSears wrote:
patstarrx wrote:
t20569cald wrote:
patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
The mommy and daddy button
My guess is yes, as long as you don't mind dippin yer junk in molten hot plastic. :mrgreen:
If that's like candle wax he should be ok, right Terry??? :gayumbrella:




Sent using Tapatalk
It runs at 230 degrees C

So it could make a great viral Youtube video
Image
Rome wasn't built in a day, but i wasn't on that job!


http://www.aegirinstruments.com

User avatar
toxicavenger
President Tranny
Posts: 48085
Joined: Fri Mar 12, 2010 8:25 am
Name: HeadDIK
Location: Colorado Springs

Re: CD-1 rapid prototype

Post by toxicavenger » Tue Apr 16, 2013 8:56 am

hoppyjr wrote:
BSears wrote:
patstarrx wrote:
t20569cald wrote:
patstarrx wrote:Can it make my hammer glow ?? :excited:
not sure what that means really,,,,,, but I am sure it could.
The mommy and daddy button
My guess is yes, as long as you don't mind dippin yer junk in molten hot plastic. :mrgreen:
If that's like candle wax he should be ok, right Terry??? :gayumbrella:




Sent using Tapatalk
you have to do it really fast or else you can get 3rd degree burns. :whistle:

Post Reply

Who is online

Users browsing this forum: No registered users and 67 guests