CD-1 update
Moderator: t20569cald
- t20569cald
- Founder and Owner of Ægir Instruments
- Posts: 2157
- Joined: Wed Dec 02, 2009 7:20 am
- Location: Australia
CD-1 update
It is going slow, but it is going.
Currently working on the dial size to 33mm, up from the current CD-2 dial of 30mm. All new Appliques will now be made, to fatten them a little and lengthen them too.
These renders are just showing the bezel slimmed down, and soon will be dials, hands etc.
We are now (I hope) making headway on the CD-2 LE, and as those are shipped out, the CD-1 will go straight into production.
There will be a change in the lug holes to accommodate thicker straps, hex screws as well as well as a few other things, and yes, I give in, a lumed second hand!
Currently working on the dial size to 33mm, up from the current CD-2 dial of 30mm. All new Appliques will now be made, to fatten them a little and lengthen them too.
These renders are just showing the bezel slimmed down, and soon will be dials, hands etc.
We are now (I hope) making headway on the CD-2 LE, and as those are shipped out, the CD-1 will go straight into production.
There will be a change in the lug holes to accommodate thicker straps, hex screws as well as well as a few other things, and yes, I give in, a lumed second hand!
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: CD-1 update
Looking good
Re: CD-1 update
Don't let the WUS crowd ruin your watch.
Re: CD-1 update
Very exciting Todd.
I can't even begin to imagine your patience and commitment to this project along with the CD-2 LE after reading your email update today. I'm in awe. Seriously.
Personally, I don't give a toss about the inclusion/exclusion of lumed second hand (though I know it was a topic of debate in a recent WUS thread. I'm just excited to see the CD-1 come to fruition. And of course, see the CD-2 LEs make into the hands of the lucky few.
I can't even begin to imagine your patience and commitment to this project along with the CD-2 LE after reading your email update today. I'm in awe. Seriously.
Personally, I don't give a toss about the inclusion/exclusion of lumed second hand (though I know it was a topic of debate in a recent WUS thread. I'm just excited to see the CD-1 come to fruition. And of course, see the CD-2 LEs make into the hands of the lucky few.
- t20569cald
- Founder and Owner of Ægir Instruments
- Posts: 2157
- Joined: Wed Dec 02, 2009 7:20 am
- Location: Australia
Re: CD-1 update
Well to be honest, it is going to appear because the SD-1 was always going to have it. As they will share a dial and hand sets, there is little point in tooling for 2 second hands (costs money) so may as well share one, and this will be lumed.Dedalus wrote:Very exciting Todd.
I can't even begin to imagine your patience and commitment to this project along with the CD-2 LE after reading your email update today. I'm in awe. Seriously.
Personally, I don't give a toss about the inclusion/exclusion of lumed second hand (though I know it was a topic of debate in a recent WUS thread. I'm just excited to see the CD-1 come to fruition. And of course, see the CD-2 LEs make into the hands of the lucky few.
Re: CD-1 update
I need too start saving...this is gonna rock
Sent using Tapatalk
Sent using Tapatalk
Re: CD-1 update
Wordhoppyjr wrote:I need too start saving...this is gonna rock
Sent using Tapatalk
Pasquale
NSC
NSC
Re: CD-1 update
Thanks for the update....I want one..
Re: CD-1 update
I've been waiting for this one since the inception. Todd, don't rush it - I want one for my 2014 purchase.
Re: CD-1 update
+1mechnut wrote:I've been waiting for this one since the inception. Todd, don't rush it - I want one for my 2014 purchase.
CD-1 has been in my sights since first announced. Late this year or early next would be fine in my books.
Re: CD-1 update
This.aboen wrote:Looking sexy as hell so far.
And this.patstarrx wrote:Wordhoppyjr wrote:I need too start saving...this is gonna rock
Sent using Tapatalk
Re: CD-1 update
craniotes wrote:CD-1 FTW!
Regards,
Adam
Where've you been, Adam?
You must be itching to get that CD-2 LE into your mits.
- Jeep99dad
- Grand-père
- Posts: 32292
- Joined: Tue Apr 27, 2010 6:07 am
- Name: Brice
- Location: FlipVille, SC
Re: CD-1 update
Wow. Love the case/bezel.
Can't wait to see more.thanka for the update.
Can't wait to see more.thanka for the update.
Merde Alors! Et Vive Les Francais!
- Axelay2003
- Posts: 5916
- Joined: Sat Dec 04, 2010 9:03 am
- Name: Gerard
- Location: City of Oranges, FL
- BSears
- The Grumpy Global Mod
- Posts: 19191
- Joined: Tue Dec 01, 2009 12:22 pm
- Name: Mr. Dibs
- Location: Big Blue Nation, Land of the Free-Home of the Brave
Re: CD-1 update
In. money right there. Can't wait Todd.
You give respect, you'll get respect - you just don't know your place.
Re: CD-1 update
Love the watch !! Hoping for more updates soon enough
Who is online
Users browsing this forum: No registered users and 94 guests