New Dials
Moderator: t20569cald
- t20569cald
- Founder and Owner of Ægir Instruments
- Posts: 2157
- Joined: Wed Dec 02, 2009 7:20 am
- Location: Australia
New Dials
New dials are complete, and on their way to Thomas Prescher and Fricker.
Waiting on A10 movements still, but should be with us anytime.
Note the alignment, got it right this time, changed the second makers at 6 o'clock to move up the text for a clearer view and most of all, changed the font on CD-2 and 701M to stand out a little better than the old.
Some may notice one is Blue. I had 10 second hands dipped in Blue as well as 5 dials from each model, the LE and Standard with Blue 701M. It was done as a diving colleague wanted one, so I made a few.
For the LE it will be offered on any serial, for the standard it will be numbers 31 through 35.
Waiting on A10 movements still, but should be with us anytime.
Note the alignment, got it right this time, changed the second makers at 6 o'clock to move up the text for a clearer view and most of all, changed the font on CD-2 and 701M to stand out a little better than the old.
Some may notice one is Blue. I had 10 second hands dipped in Blue as well as 5 dials from each model, the LE and Standard with Blue 701M. It was done as a diving colleague wanted one, so I made a few.
For the LE it will be offered on any serial, for the standard it will be numbers 31 through 35.
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: New Dials
Nice
So can I start a lay away scheam for the 46mm version?
So can I start a lay away scheam for the 46mm version?
Re: New Dials
You sure 46mm will be big enough Jamie?
Love the dials Todd.
Looking forward to seeing pics of these hit the boards (hopefully some of those pics will be mine)
Love the dials Todd.
Looking forward to seeing pics of these hit the boards (hopefully some of those pics will be mine)
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: New Dials
Jared I would be in for 44 and up mate I can't say how much of a beleiver I am after meeting Todd and seeing the watch in the steel. Unbeleivable watch just a stellar combination.
- FlyPenFly
- Posts: 4788
- Joined: Fri Jul 16, 2010 7:15 am
- Name: Off, Jerk
- Location: San Diego, CA
- Contact:
Re: New Dials
The layout of the CD-2 and 701M looks way better than before, nice!
Re: New Dials
Jamie wrote:Nice
So can I start a lay away scheam for the 46mm version?
Heck I'm in.. Todd the more I see these watches come to life the more I want one.
I gota say Ur doing a great job. Kudos to you and everyone that's in line to get them..
I want a LE in 46
Pasquale
NSC
NSC
- craniotes
- Thread Pooper
- Posts: 9578
- Joined: Thu Dec 03, 2009 7:19 am
- Name: Ad Rock
- Location: Manhattan
Re: New Dials
Just for good measure (I already posted in the other thread...):
Make mine blue!
Regards,
Adam
Make mine blue!
Regards,
Adam
CAPT. THREAD POOPER
- SCM64
- Global Mod/Sinn fanboy
- Posts: 16523
- Joined: Tue Dec 01, 2009 2:27 pm
- Location: N27° 56.79', W82° 27.55'
Re: New Dials
Looking good. Been great following all this.
Steven
Sexually Desirable RockStar Moderator
Sexually Desirable RockStar Moderator
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: New Dials
I know Pat I know this is too small for my wrist I know that but I have been so impressed by it that I keep coming back and looking at the photo's and trying to convince myself I could handle a smaller watch in the collection.patstarrx wrote:Jamie wrote:Nice
So can I start a lay away scheam for the 46mm version?
Heck I'm in.. Todd the more I see these watches come to life the more I want one.
I gota say Ur doing a great job. Kudos to you and everyone that's in line to get them..
I want a LE in 46
OK Pat lets start the unofficial pre order list and see if we can't get Todd to move it into production.......
Re: New Dials
Lookin' good! Are the indices in both the same? The one on the red font dial has more depth/contrast and perhaps its just the angle of the photo.
-luke
- demer03
- Current Forecast: Vintage Doxa
- Posts: 19629
- Joined: Fri Dec 04, 2009 2:41 pm
- Name: Mike
- Location: Lake Michigami
Re: New Dials
Well done Todd. The blue is sharp.
Old Michigan steams like a young man's dreams
The islands and bays are for sportsmen
The islands and bays are for sportsmen
Re: New Dials
Why no larger 6 and 9 marker?
Re: New Dials
Well if you know where 12 is........hks3sgte wrote:Why no larger 6 and 9 marker?
- t20569cald
- Founder and Owner of Ægir Instruments
- Posts: 2157
- Joined: Wed Dec 02, 2009 7:20 am
- Location: Australia
Re: New Dials
snoballz wrote:Lookin' good! Are the indices in both the same? The one on the red font dial has more depth/contrast and perhaps its just the angle of the photo.
Just the angle, exactly the same
Re: New Dials
I don't care where 12 is. I want 6 and 9, Dammitmatt.wu wrote:Well if you know where 12 is........hks3sgte wrote:Why no larger 6 and 9 marker?
- t20569cald
- Founder and Owner of Ægir Instruments
- Posts: 2157
- Joined: Wed Dec 02, 2009 7:20 am
- Location: Australia
Re: New Dials
hks3sgte wrote:Why no larger 6 and 9 marker?
Well yeah, I liked that, "if you know where 12 is"
But seriously, this watch grew from the CD-1 (without timing bezel) which in turn was designed solely as a commercial divers watch.
No need for any dive functions, except WR and He valve.
When conceptualizing the watch, I did it with the "one watch" idea in mind, as most people only have one watch for all uses.
Not like you chaps.
A watch that would work as a diving watch while being dressy enough and the right size to wear everyday.
A compromise here, a compromise there, and the CD was born.
When it was in the more advanced design stages, the designer who was doing it (not me at that point) talked with me about what was needed and what not. In the end we came out with this and it was exactly what it was supposed to be.
I might make a scuba watch later, ok i will make one at some point, and lume the shit out of it, add a lume dot to the second hand, take the HEV away, get a crazy orange minute hand and lume the bezel under a sapphire ring and make the thing out of DLC Ti.
Not a watch I would wear, but something that people want.
So at this time, the one model being released and the coming CD-1 are watches that were designed for me to wear and that is why they lack some of the functions that would see them as better "scuba" watches.
Re: New Dials
I don't know what they're talking about; they must be pro divers?
But I'd take that diving any day.
But I'd take that diving any day.
"We'd better synchronize our watches."
- t20569cald
- Founder and Owner of Ægir Instruments
- Posts: 2157
- Joined: Wed Dec 02, 2009 7:20 am
- Location: Australia
Re: New Dials
As would I.aikiman44 wrote:I don't know what they're talking about; they must be pro divers?
But I'd take that diving any day.
If I was going deep I would use a computer, but otherwise I would be happy to just run off this watch
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: New Dials
WTF there is nothing wrong with the lay out design or composition of this thing Todd, Not a F@$king thing its sublime ands all the details work prefectly.
A little small but hey I am a Sasquach
A little small but hey I am a Sasquach
Re: Re: New Dials
I already told Todd I would like a 44 mm so add me to the list.Jamie wrote:I know Pat I know this is too small for my wrist I know that but I have been so impressed by it that I keep coming back and looking at the photo's and trying to convince myself I could handle a smaller watch in the collection.patstarrx wrote:Jamie wrote:Nice
So can I start a lay away scheam for the 46mm version?
Heck I'm in.. Todd the more I see these watches come to life the more I want one.
I gota say Ur doing a great job. Kudos to you and everyone that's in line to get them..
I want a LE in 46
OK Pat lets start the unofficial pre order list and see if we can't get Todd to move it into production.......
Ken
Sent from my DROIDX using Tapatalk
Re: New Dials
craniotes wrote:Just for good measure (I already posted in the other thread...):
Make mine blue!
Regards,
Adam
¯\_(ツ)_/¯
- t20569cald
- Founder and Owner of Ægir Instruments
- Posts: 2157
- Joined: Wed Dec 02, 2009 7:20 am
- Location: Australia
Re: New Dials
ezcheese wrote:craniotes wrote:Just for good measure (I already posted in the other thread...):
Make mine blue!
Regards,
Adam
OH dear, it would appear I got this detail wrong, only 5 blue dials from the planned 50 are with Blue 701 and second hand. All made by the way, and now the first 3 who have seen this that are on the list want Blue. Hmmm, well this will be the LE of the LE then!
Re: New Dials
Relax, guys, I never said there was anything wrong with the dial... in fact, I love it.
My SHOM doesn't even have a 12 o'clock marker and its been the most legible ever
Great work, still
My SHOM doesn't even have a 12 o'clock marker and its been the most legible ever
Great work, still
Who is online
Users browsing this forum: No registered users and 127 guests