Introducing the Sinn EZM 1.1 Limited Edition

Discussion of Sinn watches.
User avatar
jswing
Founder, TDWC MM300 Fan Club
Posts: 8342
Joined: Sat Mar 12, 2011 8:54 am
Name: Jeff
Location: NJ

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by jswing » Fri Sep 15, 2017 3:48 pm

gr8sw wrote:
BBK357 wrote:
Thu Sep 14, 2017 7:34 am

Image
looking good, Ben! :salute:

most excellent trio! :cheers:
Really looks good, congrats to all that grabbed one.

Sent from my LG-K425 using Tapatalk


User avatar
kempoman
Posts: 2614
Joined: Sun Jan 17, 2010 10:21 pm
Location: Borneo Island

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by kempoman » Fri Sep 15, 2017 5:43 pm

Cowbiker wrote:
Fri Sep 15, 2017 1:05 pm
kempoman wrote:
Thu Sep 14, 2017 7:21 am
Cowbiker wrote:
Thu Sep 14, 2017 7:07 am
matt.wu wrote:
Wed Sep 13, 2017 9:36 am
Cowbiker wrote:
Wed Sep 13, 2017 9:10 am
matt.wu wrote:
Thu Aug 31, 2017 9:09 am
I really am tempted to order. If they made 100 instead of 500, I'd already have ordered.

Updated link: http://www.watchbuys.com/store/pc/Sinn- ... -4p815.htm
I hear you on tempted Matt, stainless...why?!?, if it was Ti like the O.G. I'd be posting a wrist shot on bracelet by now.
Sup dude!

I still caved and ordered anyway... but I would have preferred Teg Ti as well, I think.
Congrats, I really like it, the case material choice is probably the only thing holding me back. Been lurking, totally consumed with Long Drive Gowf these days, thinned the heard down to the ND Sub, the 372, Oris 65 on tropic and scored a polished ti GP SH II Pro.

Trust you've been well. Great score on the 1.1, enjoy it.
Would like to see the polished GP SH II Pro pics if you own any..
Found NIB, upgraded it with custom HKTan strap and the factory deployant clasp, all inspired by WUS Victor Boyd.
Image
:fro: :fro: i own one too.
Watch collector since 1989

User avatar
BBK357
Ban Jacobs
Posts: 28822
Joined: Mon Aug 15, 2011 2:01 pm
Name: Vladimir
Location: Ohio

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by BBK357 » Fri Sep 15, 2017 5:46 pm

Here's your unofficial non-caliper lug-to-lug measurement on the EZM 1.1

It's looking like 47mm. Just a C hair under, but I see about 47mm. BTW I did this multiple times and taking a pic was just for a little proof, as it was difficult to hold w one hand.
I also measured the U1P to check my measurement ability and it looks to be right at 50mm.

Image
-
Image
-
Image
-
Image
-
Image

DEATH FROM ABOVE
:ak:

User avatar
bpax
Posts: 1758
Joined: Sat Oct 16, 2010 7:37 am
Name: Bill
Location: Austin, Texas

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by bpax » Fri Sep 15, 2017 5:58 pm

BBK357 wrote:
Fri Sep 15, 2017 5:46 pm
Here's your unofficial non-caliper lug-to-lug measurement on the EZM 1.1

It's looking like 47mm. Just a C hair under, but I see about 47mm. BTW I did this multiple times and taking a pic was just for a little proof, as it was difficult to hold w one hand.
I also measured the U1P to check my measurement ability and it looks to be right at 50mm.

Image
-
Image
-
Image
-
Image
-
Image
Damn, this looks great. I'm still anxiously awaiting my notice from WatchBuys.

User avatar
jswing
Founder, TDWC MM300 Fan Club
Posts: 8342
Joined: Sat Mar 12, 2011 8:54 am
Name: Jeff
Location: NJ

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by jswing » Fri Sep 15, 2017 6:19 pm

BBK357 wrote:Here's your unofficial non-caliper lug-to-lug measurement on the EZM 1.1

It's looking like 47mm. Just a C hair under, but I see about 47mm. BTW I did this multiple times and taking a pic was just for a little proof, as it was difficult to hold w one hand.
I also measured the U1P to check my measurement ability and it looks to be right at 50mm.

Image
-
Image
-
Image
-
Image
-
Image
I'm really surprised, it looked longer in the original wrist shot I saw. That's very wearable, even for me. I'm glad I didn't know that or I may have splurged for one.

Sent from my LG-K425 using Tapatalk


User avatar
Chocodove
Posts: 8942
Joined: Mon Jun 17, 2013 1:35 pm
Name: Todd
Location: NJ

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by Chocodove » Fri Sep 15, 2017 6:31 pm

jswing wrote:
BBK357 wrote:Here's your unofficial non-caliper lug-to-lug measurement on the EZM 1.1

It's looking like 47mm. Just a C hair under, but I see about 47mm. BTW I did this multiple times and taking a pic was just for a little proof, as it was difficult to hold w one hand.
I also measured the U1P to check my measurement ability and it looks to be right at 50mm.

Image
-
Image
-
Image
-
Image
-
Image
I'm really surprised, it looked longer in the original wrist shot I saw. That's very wearable, even for me. I'm glad I didn't know that or I may have splurged for one.

Sent from my LG-K425 using Tapatalk
Completely agree. Seems very wearable on a smallish wrist and had that spec been official on release, I very likely would have jumped as well.
- Todd

User avatar
Nellipj
Posts: 5550
Joined: Mon Dec 17, 2012 4:56 am
Name: Patrick
Location: Frankfort, IL

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by Nellipj » Fri Sep 15, 2017 8:07 pm

Come on Watchbuys, send me my final invoice!


Sent from my iPhone using Tapatalk

User avatar
matt.wu
Wu
Posts: 29817
Joined: Tue Dec 01, 2009 1:33 pm
Name: m@
Location: SF Bay Area, CA, USA

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by matt.wu » Fri Sep 15, 2017 8:28 pm

Nellipj wrote:Come on Watchbuys, send me my final invoice!


Sent from my iPhone using Tapatalk

Me too!
:htfu:

User avatar
mfxr
Posts: 1673
Joined: Tue Jan 25, 2011 12:19 am
Name: MattF
Location: Australia

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by mfxr » Sat Sep 16, 2017 3:46 am

Congrats to everyone that has grabbed one - very cool watch.
So clean, it is like the anti-chrono!

User avatar
Erratic101
Posts: 2885
Joined: Wed Jan 08, 2014 7:40 am
Name: Justyn

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by Erratic101 » Sat Sep 16, 2017 3:54 am

BBK357 wrote:Here's your unofficial non-caliper lug-to-lug measurement on the EZM 1.1

It's looking like 47mm. Just a C hair under, but I see about 47mm. BTW I did this multiple times and taking a pic was just for a little proof, as it was difficult to hold w one hand.
I also measured the U1P to check my measurement ability and it looks to be right at 50mm.

Image
-
Image
-
Image
-
Image
-
Image
I'm pretty sure you should just mail this to me so I can put my caliper on it and we can get an accurate measurement! You know, to make it all scientific!!

User avatar
gr8sw
Posts: 4804
Joined: Tue Nov 01, 2011 7:30 pm
Name: Pedro
Location: under a palm tree

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by gr8sw » Sat Sep 16, 2017 3:45 pm

anyone have the 1.1 bracelet yet?
‘I don’t worry about a thing, 'cause I know nothing’s gonna be alright’ Mose Allison

Image

User avatar
CGSshorty
Admin
Posts: 33918
Joined: Tue Dec 01, 2009 5:18 pm
Location: Boynton Beach, FL

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by CGSshorty » Sat Sep 16, 2017 3:46 pm

gr8sw wrote:anyone have the 1.1 bracelet yet?
I don't believe there are any ready yet. Last I heard they were a month behind.
"It's such a fine line between stupid, and clever."
David St. Hubbins

User avatar
gr8sw
Posts: 4804
Joined: Tue Nov 01, 2011 7:30 pm
Name: Pedro
Location: under a palm tree

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by gr8sw » Sat Sep 16, 2017 3:50 pm

CGSshorty wrote:
Sat Sep 16, 2017 3:46 pm
gr8sw wrote:anyone have the 1.1 bracelet yet?
I don't believe there are any ready yet. Last I heard they were a month behind.
thanks for the 411, Chris :salute:

are bracelets made at SUG or someplace else?
‘I don’t worry about a thing, 'cause I know nothing’s gonna be alright’ Mose Allison

Image

User avatar
CGSshorty
Admin
Posts: 33918
Joined: Tue Dec 01, 2009 5:18 pm
Location: Boynton Beach, FL

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by CGSshorty » Sat Sep 16, 2017 3:52 pm

gr8sw wrote:
CGSshorty wrote:
Sat Sep 16, 2017 3:46 pm
gr8sw wrote:anyone have the 1.1 bracelet yet?
I don't believe there are any ready yet. Last I heard they were a month behind.
thanks for the 411, Chris :salute:

are bracelets made at SUG or someplace else?
That is a very good question. I'll find out.
"It's such a fine line between stupid, and clever."
David St. Hubbins

User avatar
CGSshorty
Admin
Posts: 33918
Joined: Tue Dec 01, 2009 5:18 pm
Location: Boynton Beach, FL

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by CGSshorty » Sat Sep 16, 2017 5:56 pm

gr8sw wrote:
CGSshorty wrote:
Sat Sep 16, 2017 3:46 pm
gr8sw wrote:anyone have the 1.1 bracelet yet?
I don't believe there are any ready yet. Last I heard they were a month behind.
thanks for the 411, Chris :salute:

are bracelets made at SUG or someplace else?
I asked Rob, and he didn't know for sure. Sinn doesn't tell them who makes their bracelets.
"It's such a fine line between stupid, and clever."
David St. Hubbins

User avatar
BBK357
Ban Jacobs
Posts: 28822
Joined: Mon Aug 15, 2011 2:01 pm
Name: Vladimir
Location: Ohio

Introducing the Sinn EZM 1.1 Limited Edition

Post by BBK357 » Sat Sep 16, 2017 10:39 pm

Pat suggested I try the U1P bracelet on the 1.1 and I did.
It fits but it's not flush. In no way did I have to force or adjust anything... it really just slides right on. I was very surprised that the lug holes lined up and everything.

I'd like to see how the actual ezm 1.1 bracelet fits, but if you already have a teg U1 bracelet and you don't think you'll wear it often, this will prob work for you.
The most noticeable is when your are looking at it from the side and you see the rounded edges hump up. Also, the shade difference between the two is there, but not very noticeable.

If it wasn't for the 1.1 bracelet being scarce, less made than the watch, then I may just keep it like this and be happy. But I don't want to miss out on one and it having a better fit.

Having this bracelet on reminds me of wearing an original ezm1 because it never fit that great and always had a slightly different shade.

Image
-
Image
-
Image
-
Image
-
Image
-
Image
-
Image
-
Image
-
Image
-
Image
DEATH FROM ABOVE
:ak:

User avatar
matt.wu
Wu
Posts: 29817
Joined: Tue Dec 01, 2009 1:33 pm
Name: m@
Location: SF Bay Area, CA, USA

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by matt.wu » Sun Sep 17, 2017 12:11 am

BBK357 wrote:Having this bracelet on reminds me of wearing an original ezm1 because it never fit that great and always had a slightly different shade.
:lol:
:htfu:

User avatar
Nellipj
Posts: 5550
Joined: Mon Dec 17, 2012 4:56 am
Name: Patrick
Location: Frankfort, IL

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by Nellipj » Sun Sep 17, 2017 3:42 am

Thanks Ben for being the test pilot. It looks really good. I'm surprised there is a color difference. I assumed the metal was the same. I will definitely be buying the correct bracelet, but it's great to know this one fits if needed.


Sent from my iPhone using Tapatalk

User avatar
aikiman44
Tiki Extraordinaire
Posts: 9440
Joined: Fri Dec 04, 2009 7:50 am
Name: J

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by aikiman44 » Sun Sep 17, 2017 3:45 am

There are plenty of watches with correct bracelets that don't match up as well.
And that color difference will never be noticeable in the real world.
"We'd better synchronize our watches."

User avatar
gr8sw
Posts: 4804
Joined: Tue Nov 01, 2011 7:30 pm
Name: Pedro
Location: under a palm tree

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by gr8sw » Sun Sep 17, 2017 8:48 am

yeah, that bracelet was definitely not made for the 1.1 case... it's passable but I know I couldn't live with it :htfu: :lol:

the 1.1 bracelet should look much better :thumbsup:

and on a side note, that Japan 'ZUZ' EZM1 brought in over $10k!

http://www.ebay.com/itm/No-Reserve-Auct ... true&rt=nc
‘I don’t worry about a thing, 'cause I know nothing’s gonna be alright’ Mose Allison

Image

User avatar
BBK357
Ban Jacobs
Posts: 28822
Joined: Mon Aug 15, 2011 2:01 pm
Name: Vladimir
Location: Ohio

Introducing the Sinn EZM 1.1 Limited Edition

Post by BBK357 » Sun Sep 17, 2017 9:47 am

After wearing it out today to get coffee, I can say that the color difference that I noted was more of the flat case lug being up against the rounded end link. The color looks the same to me.

It looks good, but I'll still get the 1.1 bracelet. I wish I could just get the end links for it though.
Last edited by BBK357 on Sun Sep 17, 2017 9:47 am, edited 1 time in total.
DEATH FROM ABOVE
:ak:

User avatar
dukerules
Posts: 15049
Joined: Tue Dec 01, 2009 4:32 pm

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by dukerules » Sun Sep 17, 2017 9:48 am

Ben, that looks very close to the original EZM1-bracelet fit. Not bad, but could be better.

User avatar
Cowbiker
Posts: 398
Joined: Thu Feb 11, 2010 7:14 am
Name: Aqua-nut
Location: SoFlo

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by Cowbiker » Mon Sep 18, 2017 6:11 am

kempoman wrote:
Fri Sep 15, 2017 5:43 pm
Cowbiker wrote:
Fri Sep 15, 2017 1:05 pm
kempoman wrote:
Thu Sep 14, 2017 7:21 am
Cowbiker wrote:
Thu Sep 14, 2017 7:07 am
matt.wu wrote:
Wed Sep 13, 2017 9:36 am
Cowbiker wrote:
Wed Sep 13, 2017 9:10 am
matt.wu wrote:
Thu Aug 31, 2017 9:09 am
I really am tempted to order. If they made 100 instead of 500, I'd already have ordered.

Updated link: http://www.watchbuys.com/store/pc/Sinn- ... -4p815.htm
I hear you on tempted Matt, stainless...why?!?, if it was Ti like the O.G. I'd be posting a wrist shot on bracelet by now.
Sup dude!

I still caved and ordered anyway... but I would have preferred Teg Ti as well, I think.
Congrats, I really like it, the case material choice is probably the only thing holding me back. Been lurking, totally consumed with Long Drive Gowf these days, thinned the heard down to the ND Sub, the 372, Oris 65 on tropic and scored a polished ti GP SH II Pro.

Trust you've been well. Great score on the 1.1, enjoy it.
Would like to see the polished GP SH II Pro pics if you own any..
Found NIB, upgraded it with custom HKTan strap and the factory deployant clasp, all inspired by WUS Victor Boyd.
Image
:fro: :fro: i own one too.
Love the movement in it, truly well thought out, self winds so quickly, it's a polished Ti bracelet away from pretty perfect. Definitely not one I'll part with easily.
Image

User avatar
BBK357
Ban Jacobs
Posts: 28822
Joined: Mon Aug 15, 2011 2:01 pm
Name: Vladimir
Location: Ohio

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by BBK357 » Tue Sep 19, 2017 6:13 pm

^^^

Thanks guys. I actually took it off bracelet as the rounded end links kinda bothered me. Can't wait to get the proper end links.


One thing I noticed when I was looking at my old ezm1 pictures was the lugs. It seems like the original had thinner and longer lugs, and the 1.1 has thicker shorter lugs. I think that is the answer to them making the case 3mm bigger yet keeping a good L2L, which is about what the original had compared to my measurements.


The original EZM1
Image
-
Image
-
Image
-
Image

New 1.1
Image
-
Image
-
Image
-
Image
DEATH FROM ABOVE
:ak:

User avatar
BBK357
Ban Jacobs
Posts: 28822
Joined: Mon Aug 15, 2011 2:01 pm
Name: Vladimir
Location: Ohio

Re: Introducing the Sinn EZM 1.1 Limited Edition

Post by BBK357 » Tue Sep 19, 2017 6:13 pm

^^^

Thanks guys. I actually took it off bracelet as the rounded end links kinda bothered me. Can't wait to get the proper end links.


One thing I noticed when I was looking at my old ezm1 pictures was the lugs. It seems like the original had thinner and longer lugs, and the 1.1 has thicker shorter lugs. I think that is the answer to them making the case 3mm bigger yet keeping a good L2L, which is about what the original had compared to my measurements.


The original EZM1
Image
-
Image
-
Image
-
Image

New 1.1
Image
-
Image
-
Image
-
Image
DEATH FROM ABOVE
:ak:

Post Reply

Who is online

Users browsing this forum: No registered users and 93 guests