My review for my uts 3000m diver after 2 years of usage.
Posted: Wed Mar 01, 2017 1:00 am
Hello fans
i would like to share with you my review on my uts 3000m diver after 2 years of everyday use.
the watch is very comfortable to wear although it is heavy but i like the heavy feel of it on my wrist.
it has a unique presence.
it hugs my wrist very well specially in the rubber strap.
i like the steel finish of the watch...very industrial looking ..nothing fancy or polished...it is a true tool watch looking.
i have been wearing it for 2 years and the finish is still in a very good shape.
the movement inside is an ETA 2824 but it is very well regulated by Mr Spinner ,the maker of the watch. I had many other watches with same movement but neither reach the level of accuracy of my diver 3000m (touch wood),
nice work done by UTS.
the bezel is the most thing i like about this watch, it has a unique bezel mechanism...it is very very sturdy and will not age or wear by time and you will never face a loosen or weaken clicks after time and that is because the bezel is not using the ordinary spring ratcheting system that clicks depening on the spring under the bezel But it depends on a ceramic ball bearing mechanism consists of a ceramic ball which go through the 60 holes of the indexing ring. And by this mechanism you will never face a wear out clicks by time.
the clicks are the most solid and strong clicks i have ever seen in a watch. Really i love the sound of the clicks.
Another thing i love about this watch is that all parzs of this watch are screwed together. ( the crystal ,the lugs,the bezel,the case back ,the movemet,the crown tube) , there is no any part that is welded or pressed or glued in this watch.
it has many many screws in it.
so it is very easy to dis-assemble this watch and change the worn item.
the crown is big and comfortable and very sturdy while operating with nice threads engaging.
i think this watch i will never flip it.
i would like to share with you my review on my uts 3000m diver after 2 years of everyday use.
the watch is very comfortable to wear although it is heavy but i like the heavy feel of it on my wrist.
it has a unique presence.
it hugs my wrist very well specially in the rubber strap.
i like the steel finish of the watch...very industrial looking ..nothing fancy or polished...it is a true tool watch looking.
i have been wearing it for 2 years and the finish is still in a very good shape.
the movement inside is an ETA 2824 but it is very well regulated by Mr Spinner ,the maker of the watch. I had many other watches with same movement but neither reach the level of accuracy of my diver 3000m (touch wood),
nice work done by UTS.
the bezel is the most thing i like about this watch, it has a unique bezel mechanism...it is very very sturdy and will not age or wear by time and you will never face a loosen or weaken clicks after time and that is because the bezel is not using the ordinary spring ratcheting system that clicks depening on the spring under the bezel But it depends on a ceramic ball bearing mechanism consists of a ceramic ball which go through the 60 holes of the indexing ring. And by this mechanism you will never face a wear out clicks by time.
the clicks are the most solid and strong clicks i have ever seen in a watch. Really i love the sound of the clicks.
Another thing i love about this watch is that all parzs of this watch are screwed together. ( the crystal ,the lugs,the bezel,the case back ,the movemet,the crown tube) , there is no any part that is welded or pressed or glued in this watch.
it has many many screws in it.
so it is very easy to dis-assemble this watch and change the worn item.
the crown is big and comfortable and very sturdy while operating with nice threads engaging.
i think this watch i will never flip it.