BBK357 wrote:Whoever gave the amazon link for the padded panties- thank you. Huge difference. Went 18 miles this morning and just some discomfort- no pain.
Took the ogre to a bike shop for a chain, water bottle bracket and getting an inch off the seat stem.
Whoever gave the amazon link for the padded panties- thank you. Huge difference. Went 18 miles this morning and just some discomfort- no pain.
Sent from my iPhone using Tapatalk
So the seat is connected to a seat tube. To lower and raise it you unclamp or unscrew the collar and slide it up and down. Well my legs are just short enough that even when it slides all the way down the seat is still too tall for me. So they have to slide the seat tube out and saw some off. He said it’s pretty common and they do it when people buy a new bike and get fitted to it.
So the seat is connected to a seat tube. To lower and raise it you unclamp or unscrew the collar and slide it up and down. Well my legs are just short enough that even when it slides all the way down the seat is still too tall for me. So they have to slide the seat tube out and saw some off. He said it’s pretty common and they do it when people buy a new bike and get fitted to it.
Sent from my iPhone using Tapatalk
Gotcha.
I guess the photo is deceiving and the bike frame is larger than it looks. I'm 5'9" with a 32" inseam, and I think I'd need to raise the seat, not lower it.
So the seat is connected to a seat tube. To lower and raise it you unclamp or unscrew the collar and slide it up and down. Well my legs are just short enough that even when it slides all the way down the seat is still too tall for me. So they have to slide the seat tube out and saw some off. He said it’s pretty common and they do it when people buy a new bike and get fitted to it.
Sent from my iPhone using Tapatalk
Gotcha.
I guess the photo is deceiving and the bike frame is larger than it looks. I'm 5'9" with a 32" inseam, and I think I'd need to raise the seat, not lower it.
I think it the pic. I’m about same size as you, maybe an inch taller. But the bars in the ogre are pretty darn low set. I’ll check it out tomorrow when I pick it up and see if they recommend the bars be adjusted.
I’ll check it out tomorrow when I pick it up and see if they recommend the bars be adjusted.
Looks like those bars are as high as they go. In other words, the stem is as high on the fork steerer tube as it can go. You can get a different stem that will have the effect of raising the bars slightly.
At 5' 9", you definitely shouldn't be cutting a seat post on that bike. It might just be a need to get familiar with a different riding position.
(TWSS)
LOL
I would think so too. I'm almost 5'9" with a 30" inseam and my Trek MTB is a size medium or medium-large (will check tonight), but I've ridden a "large" Trek MTB and seat position is fine (no cutting needed), it is just too long for me (seat to handlebar distance).
At 5' 9", you definitely shouldn't be cutting a seat post on that bike. It might just be a need to get familiar with a different riding position.
(TWSS)
LOL
I would think so too. I'm almost 5'9" with a 30" inseam and my Trek MTB is a size medium or medium-large (will check tonight), but I've ridden a "large" Trek MTB and seat position is fine (no cutting needed), it is just too long for me (seat to handlebar distance).
The current MD-size Ogre has a 31.3" standover height. That does seem kind of tall for a medium. Do Surly frames run big?
I don’t know. I’m 5’10 and I was totally racking my balls, falling from side to side and was worried about how to keep my balance when coming to a busy street. The bike trail I ride runs into a series of roads, some country and people don’t watch. Someone got killed at one of the roads last year.
31.3" standover is definitely bigger than I'd expect from a medium. That'd definitely be touching my balls.
But even with a bike too big by standover standards, I'd expect I'd be able to adjust the seat so that I could ride it (it'd just be touchy when dismounting).
31.3" standover is definitely bigger than I'd expect from a medium. That'd definitely be touching my balls.
But even with a bike too big by standover standards, I'd expect I'd be able to adjust the seat so that I could ride it (it'd just be touchy when dismounting).
Surly runs slightly big -- and this is a two-niner (so bigger yet)....... I'm not sure what he's doing to slam his balls on the tube. In general MTB I'd want slightly smaller frame, road/gravel you can go slightly bigger.....
When Ben says he is trying to figure out how all these gears and levers work I'm wondering if he's 75 years old.
"Go forth, my progeny, grab the world by the balls, squeeze hard and shake vigorously." J. Koch (aka "Swedefreak")
Ben, I think your issue might be that you are very stretched out. That’s a long stem and a pretty straight bar. I’d try a shorter stem and a bar with a little bit of sweep, like the Salsa Bend.
"It's such a fine line between stupid, and clever."
David St. Hubbins
Ok picked the ogre up from the shop today, stopped but the trail on my way home did a couple miles of test run. It rides so much different than the trek. I can tell my strides are making the bike go further- I don’t know if it’s the gear difference or the size of the tires or both. But it seems like it’s way easier to make it go.
The shop cut the seat tube and it still feels pretty high but the owner had me get in and he said it looks perfect. The handle bars are very low set and he said ride it and see if I like it, if not he’d recommend a bent bar for comfort. Also got a water bottle cage and I put on the phone holder.
My trek has a sigma 509 speedometer computer.
I may have to get one for this as I tried to use the Bike GPS app and while I was going a constant speed it kept jumping up and down. Not very reliable .