Ball Engineer III Legend Pre-Order

Come on in and introduce yourself!
General watch talk.
User avatar
Chocodove
Posts: 8969
Joined: Mon Jun 17, 2013 1:35 pm
Name: Todd
Location: NJ

Re: Ball Engineer III Legend Pre-Order

Post by Chocodove » Mon Dec 11, 2017 4:01 pm

Jeep99dad wrote:
Mon Dec 11, 2017 3:50 pm
ericf4 wrote:Didn't know it was discontinued, but damn i love it...

Image
Me too. One of my favorite with the subC and BLNR. Not counting vintage Rolex ImageImage
I like this one too, but I like the D41 much more. Both fluted and smooth bezel.

Not my photo.

Image
- Todd

User avatar
ericf4
(TBD) Penis
Posts: 15623
Joined: Wed Dec 02, 2009 6:04 am
Contact:

Re: Ball Engineer III Legend Pre-Order

Post by ericf4 » Mon Dec 11, 2017 4:54 pm

Chocodove wrote:
Jeep99dad wrote:
Mon Dec 11, 2017 3:50 pm
ericf4 wrote:Didn't know it was discontinued, but damn i love it...

Image
Me too. One of my favorite with the subC and BLNR. Not counting vintage Rolex ImageImage
I like this one too, but I like the D41 much more. Both fluted and smooth bezel.

Not my photo.

Image
I love the fluted bezel and jubilee bracelet. Damn.

Sent from my SM-G955U using Tapatalk

Visit my Music/Drumming Channel at:

https://youtube.com/ericfeuer

User avatar
CGSshorty
Admin
Posts: 33925
Joined: Tue Dec 01, 2009 5:18 pm
Location: Boynton Beach, FL

Re: Ball Engineer III Legend Pre-Order

Post by CGSshorty » Mon Dec 11, 2017 5:49 pm

ericf4 wrote:
Chocodove wrote:
Jeep99dad wrote:
Mon Dec 11, 2017 3:50 pm
ericf4 wrote:Didn't know it was discontinued, but damn i love it...

Image
Me too. One of my favorite with the subC and BLNR. Not counting vintage Rolex ImageImage
I like this one too, but I like the D41 much more. Both fluted and smooth bezel.

Not my photo.

Image
I love the fluted bezel and jubilee bracelet. Damn.

Sent from my SM-G955U using Tapatalk
The Jubilee looks fantastic on the DJ41. I came very close to selling several nice watches to buy the grey (rhodium?) dial.

Image
"It's such a fine line between stupid, and clever."
David St. Hubbins

User avatar
Chocodove
Posts: 8969
Joined: Mon Jun 17, 2013 1:35 pm
Name: Todd
Location: NJ

Re: Ball Engineer III Legend Pre-Order

Post by Chocodove » Mon Dec 11, 2017 5:53 pm

CGSshorty wrote:
ericf4 wrote:
Chocodove wrote:
Jeep99dad wrote:
Mon Dec 11, 2017 3:50 pm
ericf4 wrote:Didn't know it was discontinued, but damn i love it...

Image
Me too. One of my favorite with the subC and BLNR. Not counting vintage Rolex ImageImage
I like this one too, but I like the D41 much more. Both fluted and smooth bezel.

Not my photo.

Image
I love the fluted bezel and jubilee bracelet. Damn.

Sent from my SM-G955U using Tapatalk
The Jubilee looks fantastic on the DJ41. I came very close to selling several nice watches to buy the grey (rhodium?) dial.

Image
This or the blue would be my choice. They’re beautiful. If I could ever get over the cyclops and general blinginess of the whole package, it would be the first watch I buy.
- Todd

User avatar
CGSshorty
Admin
Posts: 33925
Joined: Tue Dec 01, 2009 5:18 pm
Location: Boynton Beach, FL

Re: Ball Engineer III Legend Pre-Order

Post by CGSshorty » Mon Dec 11, 2017 5:56 pm

Mine would look just like this, actually:

Image
"It's such a fine line between stupid, and clever."
David St. Hubbins

User avatar
Chocodove
Posts: 8969
Joined: Mon Jun 17, 2013 1:35 pm
Name: Todd
Location: NJ

Re: Ball Engineer III Legend Pre-Order

Post by Chocodove » Mon Dec 11, 2017 5:57 pm

^^^ exactly.
- Todd

User avatar
JP Chestnut
Posts: 17821
Joined: Mon May 27, 2013 10:40 am
Name: Jacob
Location: Ithaca, NY USA

Re: Ball Engineer III Legend Pre-Order

Post by JP Chestnut » Mon Dec 11, 2017 6:28 pm

The indices on the DJ41 look so much better than the DJ2. That thing was a total fail from Rolex.

User avatar
JP Chestnut
Posts: 17821
Joined: Mon May 27, 2013 10:40 am
Name: Jacob
Location: Ithaca, NY USA

Re: Ball Engineer III Legend Pre-Order

Post by JP Chestnut » Tue Dec 12, 2017 5:05 am

Rolex doesn't make watches for people like us, and I'm pretty ok with it.

They made a good faith effort with the SD-C and it was a huge failure. They replace it with the Sub XL and it's a huge success. The market spoke. Most buyers like watches that I wouldn't look twice at.

User avatar
ericf4
(TBD) Penis
Posts: 15623
Joined: Wed Dec 02, 2009 6:04 am
Contact:

Re: Ball Engineer III Legend Pre-Order

Post by ericf4 » Tue Dec 12, 2017 5:37 am

JP Chestnut wrote:Rolex doesn't make watches for people like us, and I'm pretty ok with it.

They made a good faith effort with the SD-C and it was a huge failure. They replace it with the Sub XL and it's a huge success. The market spoke. Most buyers like watches that I wouldn't look twice at.
There are about 4 or 5 Rolex I would buy, the rest are not for me.

SUB C, SD4K, DATE JUST 41, EXP2GMT, maybe BLNR. That's about it for me.

Sent from my SM-G955U using Tapatalk

Visit my Music/Drumming Channel at:

https://youtube.com/ericfeuer

User avatar
pbj204
Posts: 2429
Joined: Tue Aug 12, 2014 10:47 am
Name: Paul
Location: New York

Re: Ball Engineer III Legend Pre-Order

Post by pbj204 » Tue Dec 12, 2017 5:51 am

ericf4 wrote:
Tue Dec 12, 2017 5:37 am
JP Chestnut wrote:Rolex doesn't make watches for people like us, and I'm pretty ok with it.

They made a good faith effort with the SD-C and it was a huge failure. They replace it with the Sub XL and it's a huge success. The market spoke. Most buyers like watches that I wouldn't look twice at.
There are about 4 or 5 Rolex I would buy, the rest are not for me.

SUB C, SD4K, DATE JUST 41, EXP2GMT, maybe BLNR. That's about it for me.

Sent from my SM-G955U using Tapatalk
Image

I'm guessing that there aren't many Cellini fans here, but If I was getting a Rolex it would be this one.

User avatar
rockmastermike
Feedback Virtuoso
Posts: 20581
Joined: Tue May 18, 2010 5:13 pm
Name: WDE

Re: Ball Engineer III Legend Pre-Order

Post by rockmastermike » Tue Dec 12, 2017 6:16 am

Not a fan of the radial date but yeah that’s gorgeous

User avatar
JP Chestnut
Posts: 17821
Joined: Mon May 27, 2013 10:40 am
Name: Jacob
Location: Ithaca, NY USA

Re: Ball Engineer III Legend Pre-Order

Post by JP Chestnut » Tue Dec 12, 2017 6:44 am

I'd love a Cellini, but there's always something fundamentally wrong with them. This one included. Oyster case dress watch? Durp.

outtatime
Posts: 1708
Joined: Sat Jan 12, 2013 7:42 pm
Name: Jon
Location: Ohio

Re: Ball Engineer III Legend Pre-Order

Post by outtatime » Tue Dec 12, 2017 8:06 am

pbj204 wrote:
Tue Dec 12, 2017 5:51 am
ericf4 wrote:
Tue Dec 12, 2017 5:37 am
JP Chestnut wrote:Rolex doesn't make watches for people like us, and I'm pretty ok with it.

They made a good faith effort with the SD-C and it was a huge failure. They replace it with the Sub XL and it's a huge success. The market spoke. Most buyers like watches that I wouldn't look twice at.
There are about 4 or 5 Rolex I would buy, the rest are not for me.

SUB C, SD4K, DATE JUST 41, EXP2GMT, maybe BLNR. That's about it for me.

Sent from my SM-G955U using Tapatalk
Image

I'm guessing that there aren't many Cellini fans here, but If I was getting a Rolex it would be this one.
And see I think that's as ugly as can be. I also think most Pateks are hideous. Like this one:

Image :puke:
Current
Alpina Extreme Diver 300 | Benarus Ti47 | Breitling Avenger Seawolf | Eterna KonTiki Super 1973 | Hamilton Jazzmaster Viewmatic | Hamilton Pan Europ | IWC Aquatimer 2000 | Korsbek Oceaneer | Linde Werdelin The One 2.6 | Omega Seamaster 300 Spectre | Omega Seamaster 300 Titanium | Omega Seamaster 2531.80 | Omega Speedmaster Broad Arrow | Panerai 005 | Rolex Deepsea | Steinhart Nav-B 6497 | Steinhart Ocean Vintage Military | Stowa Seatime | Zenith El Primero Stratos

Incoming


Considering
PAM 422 | AP Royal Oak 15400 Silver | Rolex Explorer II 42mm Polar | Omega PO 8500 XL


Sometimes it's easier just to watch

User avatar
JP Chestnut
Posts: 17821
Joined: Mon May 27, 2013 10:40 am
Name: Jacob
Location: Ithaca, NY USA

Re: Ball Engineer III Legend Pre-Order

Post by JP Chestnut » Tue Dec 12, 2017 8:21 am

Those Pateks with a crown guard ARE hideous. PP is no longer the bastion of good taste that they were 10 or 15 years ago.

outtatime
Posts: 1708
Joined: Sat Jan 12, 2013 7:42 pm
Name: Jon
Location: Ohio

Re: Ball Engineer III Legend Pre-Order

Post by outtatime » Tue Dec 12, 2017 8:35 am

JP Chestnut wrote:
Tue Dec 12, 2017 8:21 am
Those Pateks with a crown guard ARE hideous. PP is no longer the bastion of good taste that they were 10 or 15 years ago.
And those are like $50k. If someone gave one to me, I wouldn't wear it. Unless they gave me the watch AND $50k on the condition I had to wear it. Then, I guess I would. But I'd wear it while doing yard work when I didn't want anyone else to see.
Current
Alpina Extreme Diver 300 | Benarus Ti47 | Breitling Avenger Seawolf | Eterna KonTiki Super 1973 | Hamilton Jazzmaster Viewmatic | Hamilton Pan Europ | IWC Aquatimer 2000 | Korsbek Oceaneer | Linde Werdelin The One 2.6 | Omega Seamaster 300 Spectre | Omega Seamaster 300 Titanium | Omega Seamaster 2531.80 | Omega Speedmaster Broad Arrow | Panerai 005 | Rolex Deepsea | Steinhart Nav-B 6497 | Steinhart Ocean Vintage Military | Stowa Seatime | Zenith El Primero Stratos

Incoming


Considering
PAM 422 | AP Royal Oak 15400 Silver | Rolex Explorer II 42mm Polar | Omega PO 8500 XL


Sometimes it's easier just to watch

User avatar
JP Chestnut
Posts: 17821
Joined: Mon May 27, 2013 10:40 am
Name: Jacob
Location: Ithaca, NY USA

Re: Ball Engineer III Legend Pre-Order

Post by JP Chestnut » Tue Dec 12, 2017 8:58 am

outtatime wrote:
Tue Dec 12, 2017 8:35 am
JP Chestnut wrote:
Tue Dec 12, 2017 8:21 am
Those Pateks with a crown guard ARE hideous. PP is no longer the bastion of good taste that they were 10 or 15 years ago.
And those are like $50k. If someone gave one to me, I wouldn't wear it. Unless they gave me the watch AND $50k on the condition I had to wear it. Then, I guess I would. But I'd wear it while doing yard work when I didn't want anyone else to see.
Don't forget the six month (at least) time to service at a cost of $X,000... which needs to happen approximately every three years. I'd love a haute perpetual calendar but holy hell that's an impractical ownership experience!

outtatime
Posts: 1708
Joined: Sat Jan 12, 2013 7:42 pm
Name: Jon
Location: Ohio

Re: Ball Engineer III Legend Pre-Order

Post by outtatime » Tue Dec 12, 2017 10:23 am

JP Chestnut wrote:
Tue Dec 12, 2017 8:58 am
outtatime wrote:
Tue Dec 12, 2017 8:35 am
JP Chestnut wrote:
Tue Dec 12, 2017 8:21 am
Those Pateks with a crown guard ARE hideous. PP is no longer the bastion of good taste that they were 10 or 15 years ago.
And those are like $50k. If someone gave one to me, I wouldn't wear it. Unless they gave me the watch AND $50k on the condition I had to wear it. Then, I guess I would. But I'd wear it while doing yard work when I didn't want anyone else to see.
Don't forget the six month (at least) time to service at a cost of $X,000... which needs to happen approximately every three years. I'd love a haute perpetual calendar but holy hell that's an impractical ownership experience!
Sounds like owning a Lamborghini. At least with one of those, you could get laid just on sight for having it. You'd do better with a Submariner than a Patek.
Current
Alpina Extreme Diver 300 | Benarus Ti47 | Breitling Avenger Seawolf | Eterna KonTiki Super 1973 | Hamilton Jazzmaster Viewmatic | Hamilton Pan Europ | IWC Aquatimer 2000 | Korsbek Oceaneer | Linde Werdelin The One 2.6 | Omega Seamaster 300 Spectre | Omega Seamaster 300 Titanium | Omega Seamaster 2531.80 | Omega Speedmaster Broad Arrow | Panerai 005 | Rolex Deepsea | Steinhart Nav-B 6497 | Steinhart Ocean Vintage Military | Stowa Seatime | Zenith El Primero Stratos

Incoming


Considering
PAM 422 | AP Royal Oak 15400 Silver | Rolex Explorer II 42mm Polar | Omega PO 8500 XL


Sometimes it's easier just to watch

User avatar
mattcantwin
mattcreatestonsofwatchrelateddrama
Posts: 18572
Joined: Wed Dec 02, 2009 3:53 pm

Re: Ball Engineer III Legend Pre-Order

Post by mattcantwin » Tue Dec 12, 2017 11:16 am

I was told by a Ball rep that the blue and white tubes are dimmer color options.


Despite the Rolex alternatives, I'm still considering the Legend.
Image

User avatar
Sniper13
Posts: 1923
Joined: Sun Feb 12, 2012 9:39 am
Name: Justin

Ball Engineer III Legend Pre-Order

Post by Sniper13 » Tue Dec 12, 2017 1:06 pm

mattcantwin wrote:
Tue Dec 12, 2017 11:16 am
I was told by a Ball rep that the blue and white tubes are dimmer color options.


Despite the Rolex alternatives, I'm still considering the Legend.
I've got blue balls, er the blue ball on order. :grin:



Image

I do love this one though

User avatar
Jeep99dad
Grand-père
Posts: 32344
Joined: Tue Apr 27, 2010 6:07 am
Name: Brice
Location: FlipVille, SC

Re: Ball Engineer III Legend Pre-Order

Post by Jeep99dad » Tue Dec 12, 2017 2:21 pm

If it had baton hour markers only I’d have ordered it for sure. Not sure I can do the squared large numerals
Merde Alors! Et Vive Les Francais! :)

caesarmascetti
Posts: 1466
Joined: Thu Feb 25, 2010 4:43 pm

Re: Ball Engineer III Legend Pre-Order

Post by caesarmascetti » Mon Jan 01, 2018 7:48 am

damn you guys look what you made me do I pre-order this one:

https://shop.ballwatch.ch/80hrs

shit....I don't need another Fng watch....Oh Happy New Year

User avatar
mattcantwin
mattcreatestonsofwatchrelateddrama
Posts: 18572
Joined: Wed Dec 02, 2009 3:53 pm

Re: Ball Engineer III Legend Pre-Order

Post by mattcantwin » Mon Jan 01, 2018 9:00 am

I passed on the Legend; not my favorite handset.


Like the Challenger handset and dial, congrats Caesar.
Image

Post Reply

Who is online

Users browsing this forum: Bing [Bot], DaveT, Emeister, flyskate, raf42, snootydog and 728 guests