It's here! My vintage Orient diver!
It's here! My vintage Orient diver!
Hey Jamie, my bezel works.
You do not have the required permissions to view the files attached to this post.
¯\_(ツ)_/¯
- T.R.
- TRTV!
- Posts: 11071
- Joined: Sun Jun 13, 2010 6:44 pm
- Name: Tommy Tutone
- Location: Sunny Central Texas
- Contact:
Re: It's here! My vintage Orient diver!
Derek - that is seriously Cool.
unixshrk wrote: I'll put it on a nice NATO for you.
Re: It's here! My vintage Orient diver!
congrats on your new orient diver, thats a realy cool looking diver. enjoy!!! steve
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: It's here! My vintage Orient diver!
Kiss my big white hairy Ar$e
Nice D mine is still sitting on the desk after stopping midday on Monday.
Shoot a couple shots of the movement and psot em up.
Nice D mine is still sitting on the desk after stopping midday on Monday.
Shoot a couple shots of the movement and psot em up.
Re: It's here! My vintage Orient diver!
Congrats on the Orient diver.
- BSears
- The Grumpy Global Mod
- Posts: 19191
- Joined: Tue Dec 01, 2009 12:22 pm
- Name: Mr. Dibs
- Location: Big Blue Nation, Land of the Free-Home of the Brave
Re: It's here! My vintage Orient diver!
love it. super sweet snag - where did you find that? oh, and yes, let's see that movement, D
You give respect, you'll get respect - you just don't know your place.
- Brian D
- DWC Tribal Council
- Posts: 4035
- Joined: Tue Dec 01, 2009 12:53 pm
- Name: Really?
- Location: Milwaukee, WI
Re: It's here! My vintage Orient diver!
Awesome looking Orient D .
The Way of the Warrior is
To Live to Die
Brian D.
To Live to Die
Brian D.
Re: It's here! My vintage Orient diver!
I popped off the case back earlier but haven't taken any pics yet. There was a ton of grease on one of the rotor wheels, I dabbed it with some rodico and got most of it off. The seller stated that the watch was recently serviced and the timegrapher shows that it is running very stable with little beat error, but it's running hella-slow. Gonna regulate it tomorrow.
Brad, I got it on ebay from the Philippines for ~$50.
Brad, I got it on ebay from the Philippines for ~$50.
¯\_(ツ)_/¯
- randyswagon
- Posts: 2049
- Joined: Sun Dec 27, 2009 12:20 pm
- Name: Heywood Jablome
- Location: Nor-Cal
- BSears
- The Grumpy Global Mod
- Posts: 19191
- Joined: Tue Dec 01, 2009 12:22 pm
- Name: Mr. Dibs
- Location: Big Blue Nation, Land of the Free-Home of the Brave
Re: It's here! My vintage Orient diver!
damn, D, niceezcheese wrote:
Brad, I got it on ebay from the Philippines for ~$50.
You give respect, you'll get respect - you just don't know your place.
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: It's here! My vintage Orient diver!
All the ones I have seen have come out of The Philipenes and Thailand.
- demer03
- Current Forecast: Vintage Doxa
- Posts: 19637
- Joined: Fri Dec 04, 2009 2:41 pm
- Name: Mike
- Location: Lake Michigami
Re: It's here! My vintage Orient diver!
It's an Orient review!
Old Michigan steams like a young man's dreams
The islands and bays are for sportsmen
The islands and bays are for sportsmen
- BSears
- The Grumpy Global Mod
- Posts: 19191
- Joined: Tue Dec 01, 2009 12:22 pm
- Name: Mr. Dibs
- Location: Big Blue Nation, Land of the Free-Home of the Brave
Re: It's here! My vintage Orient diver!
Hey Derek or Jamie, what's the model name/number on this one?
You give respect, you'll get respect - you just don't know your place.
Re: It's here! My vintage Orient diver!
I'm not sure what mine is called. It has 3 stars and "SK" on the dial.
¯\_(ツ)_/¯
Re: It's here! My vintage Orient diver!
So, I popped the caseback of again today to have another look. The movement is quite loaded down with grease. I re-read the listing on ebay and apparently, it wasn't the movement that was recently serviced, but the case was just cleaned up.
I wanted to pop the movement out of the case and throw the case into the ultrasonic cleaner, but I couldn't figure out how to release the crown on this one. There is no obvious crown screw, nor a release button. I popped the rotor off and started to take the top assembly off, thinking that maybe the crown release lever may be underneath, but I decided not to tackle too much with this one right now. I used some rodico where I could to absorb as much spare grease as possible for now.
with the rotor and three screws removed from the autowind bridge:
The rotor has some rust. A few rounds in the ultrasonic cleaner cleaned it up quite a bit, although it still looks rough.
Timegrapher results after regulation:
You may remember that initially it was running at about -60 seconds per day. I am gonna time it on the wrist for a few days and see if it will settle in a little more.
Before popping the caseback on, I greased up the gasket, but when I tried to get it back in, I noticed it's a little too small. I don't like these flat gaskets anyway, so I will be ordering an O-ring for this one.
I wanted to pop the movement out of the case and throw the case into the ultrasonic cleaner, but I couldn't figure out how to release the crown on this one. There is no obvious crown screw, nor a release button. I popped the rotor off and started to take the top assembly off, thinking that maybe the crown release lever may be underneath, but I decided not to tackle too much with this one right now. I used some rodico where I could to absorb as much spare grease as possible for now.
with the rotor and three screws removed from the autowind bridge:
The rotor has some rust. A few rounds in the ultrasonic cleaner cleaned it up quite a bit, although it still looks rough.
Timegrapher results after regulation:
You may remember that initially it was running at about -60 seconds per day. I am gonna time it on the wrist for a few days and see if it will settle in a little more.
Before popping the caseback on, I greased up the gasket, but when I tried to get it back in, I noticed it's a little too small. I don't like these flat gaskets anyway, so I will be ordering an O-ring for this one.
You do not have the required permissions to view the files attached to this post.
¯\_(ツ)_/¯
- Jamie
- I'll slip an extra shrimp on the barbie for you
- Posts: 4529
- Joined: Wed Dec 02, 2009 6:26 pm
- Name: Jamie
- Location: Sydney
Re: It's here! My vintage Orient diver!
From what I know they went by the name King Diver.
Derek when mine was opened in Sydney he also mentioned that it was a different construction than normal but I cant remember exactly how so.
There are a few on the bay today D you got a deal!!!!!
http://cgi.ebay.com/VINTAGE-70S-ORIENT- ... 5107wt_713
http://cgi.ebay.com/HUGE-VINTAGE-ORIENT ... 2922wt_930
http://cgi.ebay.com/RARE-Vintage-Orient ... 3694wt_930
Derek when mine was opened in Sydney he also mentioned that it was a different construction than normal but I cant remember exactly how so.
There are a few on the bay today D you got a deal!!!!!
http://cgi.ebay.com/VINTAGE-70S-ORIENT- ... 5107wt_713
http://cgi.ebay.com/HUGE-VINTAGE-ORIENT ... 2922wt_930
http://cgi.ebay.com/RARE-Vintage-Orient ... 3694wt_930
- BSears
- The Grumpy Global Mod
- Posts: 19191
- Joined: Tue Dec 01, 2009 12:22 pm
- Name: Mr. Dibs
- Location: Big Blue Nation, Land of the Free-Home of the Brave
Re: It's here! My vintage Orient diver!
Jamie wrote:From what I know they went by the name King Diver.
Derek when mine was opened in Sydney he also mentioned that it was a different construction than normal but I cant remember exactly how so.
There are a few on the bay today D you got a deal!!!!!
http://cgi.ebay.com/VINTAGE-70S-ORIENT- ... 5107wt_713
http://cgi.ebay.com/HUGE-VINTAGE-ORIENT ... 2922wt_930
http://cgi.ebay.com/RARE-Vintage-Orient ... 3694wt_930
I saw a few of those, esp that last one, this afternoon. Just about pulled the trigger but held off. I'd like to see a few more models in this line up first.
You give respect, you'll get respect - you just don't know your place.
Re: It's here! My vintage Orient diver!
Cool. It looks like there are quite a few versions out there.
¯\_(ツ)_/¯
-
- Posts: 45
- Joined: Fri Feb 28, 2020 10:33 pm
Re: It's here! My vintage Orient diver!
Tri Star Super Kingezcheese wrote:I'm not sure what mine is called. It has 3 stars and "SK" on the dial.
Sent from my HMA-L09 using Tapatalk
- gonzomantis
- Posts: 3423
- Joined: Sat Feb 18, 2012 8:40 pm
- Name: Mike
Re: It's here! My vintage Orient diver!
I'm sure this will be welcome news, as he has been kept awake for 10 years waiting for the answer.Bradley_Goodchil wrote: ↑Sun Jun 14, 2020 9:21 pmTri Star Super Kingezcheese wrote:I'm not sure what mine is called. It has 3 stars and "SK" on the dial.
Sent from my HMA-L09 using Tapatalk
Re: It's here! My vintage Orient diver!
Sure that he's enjoying it ten years down the road...
"Don't sweat the petty things and don't pet the sweaty things." - George Carlin
Re: It's here! My vintage Orient diver!
First you bump an 8 year old thread... and now a 10 year old thread?
- mattcantwin
- mattcreatestonsofwatchrelateddrama
- Posts: 18584
- Joined: Wed Dec 02, 2009 3:53 pm
Re: It's here! My vintage Orient diver!
Enough of this already, get out of the car!
Re: It's here! My vintage Orient diver!
No, it's not Tourettes.
Who is online
Users browsing this forum: brudy, Cabaiguan, DocHollidayDDS, Nomadz and 909 guests